GM-SAAC003 Standalone FRID Card Reader
1) The Card readeris a slim Wiegand Output Access Control Card Reader, compatible
with 125KHz EM format card.
The reader is fully potted, and can function at extreme
temperatures (-40℃~60℃), which allows it is capable to be mounted
either indoor or outdoor.
2) Card reader is used to sense the card. Most of them can support
ID card(EM Card) or IC Card(MF
Card). Few of them can support HID card or CPU card.
As soon as users sense the right card, it will send an signal to
power supply, and power supply will
send an signal to lock, after that, lock will open the door.
3) Users can also connect card reader with access controller, after
that, connect access controller to
computers. As soon as users sense the right card, it will send an
signal to access controller, access
controller will send an signal to power supply, and power supply
will send an signal to lock, after
that, lock will open the door.
4) All our card readers are certified by IP68, so, users don't need
to worry about waterproof, it can be
installed outside the door.
5) All our card readers have WG26 or WG34 output, so, it can be
connected with any access controller
which support WG26 or WG34 input
Working Voltage: 12VDC to 18VDC
Card Type: EM Card(ID Card)/MF Card (IC Card)/HID Card
Two Mother Card: Add Card + Delete Card + Remote
User Capacity: 2000 User
Sensing Distance: 2cm to 6cm
Working Temperature: -40°to +60°
Working Humidity: 0% to 98%
Fasting React Time: <0.1 second from sensing card to open the
Housing: ABS Housing
Size(L x W x H): 102×48×20 (mm)
How to connect?
Packaging & Delivery
1. Packaging Details
Standard Carton Package
2. Delivery Time
10~15 days after receiving the payment